Creality SpacePi X4 Filament Dryer

Triple Safety Protection

Product Parameters
Product Name: Creality SpacePi X4
Product Size:382x290x270mm
Packaging Size:453X350X330mm
Product Net Weight:5kg
Housing Material: ABS/PA/PC
Flame Retardant Grade: UL 94 V-0
Input Voltage:
UK/GB/EUR/AUS/BRA/CHLARG 220-240V~50/60Hz
US/JPN 100-120V~50/60Hz
Rated Power: 360W
Temperature Range: 45-85℃
Drying Time: 1-48h
Applicable Filament:
Spool Diameter ≤ 200mm,
width ≤ 150mm,
wire diameter: 1.75/2.85mmDual chambers Independent Temperature Control

Each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament typesat different temperatures in one machine.Flexible and Energy-Efficient Drying

You can choose between single or dual chamber modes for energy-efficient drying. Single-chamber operation saves up to 40% energy, it's eco-friendly and cost-effective.Space Dry 4.0TM  One-stop Drying Solution

The Space Dry 4.0rm achieves the perfect balance between efficient dehumidification and energy-saving drying. lts du-al-chamber design significantly reduces energy consumption while integrating efficient heating, desiccant regeneration, and active dehumidification to improve drying/storage capabilities.

Offering a one-stop intelligent drying experience, Space Dry 4.0rm sets a new benchmark in drying technology360° Hot Air circulation

The 360° surrounding hot air circulation ensures efficient heating and consistent temperature, allowing for uniform drying of filaments inside the chamber.Active Dehumidification

Dual dehumidifying fans actively expel moisture during drying, no manual dehumidification.Smarter prying Elevated printing Experience

First drying scene touch Ul

With an 3.2" touch screen offers a smoother,more intuitive interaction.Explore more about Space Pi X4

1.What types of filaments can Space Pi X4 dry?

SpacePiX4 supports drying common filaments like PLA,PETC, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU, and their variations. For best results, follow the drying temperature recommended by the filament manufacturer. Filaments requiring drying temperatures up to 85°C can be dried efficiently, Those needing higher temperatures can still be dried, but with longer drying times.

2.Can l use 3kg or 5kg spools?

As long as the spool diameter is ≤200mm, width ≤150mm,and filament diameter is 1.75mm or 2.85mm.

3.Can l dry filament while printing?

We recommend drying the filament thoroughly before printing. Drying time varies by material-refer to the user manual or the manufacturer's guidelines. Once dried, you can feed the filament to your printer using a 4mm PTFE tube.

4.Can l use CFs and Space Pi X4 together?

Yes! We suggest drying filament fully in Space Pi X4before transferring it to CFS for printing. While CFS is in use, you can pre-dry and store the next batch in SpacePiX4, improving workflow efficiency without occupying CFS resources.

5.Can l store filament in Space Pi X4 when it's not drying?

Absolutely! Space Pi X4 functions as a sealed storage unit, keeping filaments dry even when not actively heating. lt s airtight design and built-in desiccant help maintain low humidity for long-term filament protection.